PeakDo Link Power Power Bank for Star Link Mini User Guide

• Grant necessary permissions for ‘Home screen shortcuts’ on your
  browser.
• Follow the on-screen instructions to install the Web App for a
  more integrated experience.

• The Web App communicates with Link Power Pack via
  Bluetooth.
• Tap the ‘Connect to a device’ button to pair with your Link
  Power Pack.

• Some actions may require authentication with a PIN (default
  PIN: 020555).
• Follow on-screen instructions for pairing, and grant necessary
  permissions to your browser for Bluetooth access.

• The UI is user-friendly with some advanced options hidden by
  default.
• You can enable advanced actions by checking the ‘Expert Mode’
  in the menu.

Frequently Asked Questions (FAQ):

Q: Which browsers are supported by the Web App?

A: The Web App currently works on Windows/macOS browsers:
Chrome, Edge, Opera; Android browsers: Chrome, Edge, Opera, Samsung
Internet; iOS browser: Bluefy.

Q: What should I do if my browser lacks Bluetooth access
permission?

A: If your browser prompts you to grant Bluetooth access
permission, follow the on-screen guide to allow access to connect
to Link Power Pack.

Q: How do I troubleshoot Bluetooth connectivity?

A: Ensure that Bluetooth is turned on and active on your device.
The Bluetooth icon should be highlighted white on top of the screen
for proper connectivity.

“`

Link Power Pack
Power Bank for Starlink® Mini
Quick Start V 1.1

Link Power Pack Quick Start
Introduction
Recognizing the Link Power Pack Link Power Pack is a power pack specifically designed for DeWALT®/Makita® battery packs. Link Power Pack can mount 1 to 4 battery packs, BP4SL3-D4 for DeWALT® Interface BP4SL3-M4 for Makita® Interface. Link Power Pack supports XT60 and DC outputs, XT60 outputs 15V~21V (65W Max) and DC outputs 15V~21V (50W Max). The Link Power Pack’s DC port can power the Starlink® Mini! Simply press and hold the power button to turn the DC output on and off to control the StarlinkeMini. Bluetooth can be activated by pressing the power button three times in succession. Once paired, it enables remote control of the DC output interface.
NOTE: XT60 port and DC port are for output only

Link Power Pack Quick Start
What’s In the Box

Link Power Pack

DC-to-DC Cable

Device Overview
Handle

LED Power Button

XT60 Port

DC Port (2.1 x 5.5mm)

Link Power Pack Quick Start
Install the battery
Simply align the connector and press down to complete the installation
Remove the battery
Press the button and lift it upwards for smooth removal.

Link Power Pack Quick Start
Manually Controlling the DC Port
You can manually enable or disable the Link Power Pack ‘s DC port, which in turn powers your Starlink® Mini on or off. To do this, press and hold the Power Button for at least 2 seconds. The LED indicator will quickly flash twice to confirm this action. When the DC port is enabled, the LED indicator will gently pulse. When the DC port is disabled, the LED indicator will turn off.
Using Web App
NOTE: The Web App currently only works on following browsers: Windows/macOS: Chrome, Edge, Opera Android: Chrome, Edge, Opera, Samsung Internet iOS: Bluefy
NOTE: The Web App can function offline after your initial visit.
Access Web App
Scan the following QR code, Or type in the URL https://peakdo.com/pwa/link-power-1/index.html manually.

Link Power Pack Quick Start
(Optional) Install Web App
NOTE: You may need to grant your browser ‘Home screen shortcuts’ permission. You can access the Web App directly in your browser. For a more integrated experience, you can also install it like a native app, which provides a launch icon on your desktop or allows it to be pinned to your Windows Taskbar. When you visit the Web App for the first time, your browser may prompt you to install it.
If not, you can typically find the installation option via your browser’s “Add to Home screen” or similar menu.

Link Power Pack Quick Start
Follow the on-screen guide to install the Web App:
Connect to Link Power Pack
The Web App communicates with Link Power Pack via Bluetooth.
You can connect to your Link Power Pack by tap the “Connect to a device” button. Your browser will scan for all nearby Link Power Pack devices and display them in a list, allowing you to select one to pair. NOTE: In some situations, a previously paired or bonded device may not show up in the list. You can unpair or remove the bond from your system and try again.

Link Power Pack Quick Start
Grant permission to Browser
If your browser lacks Bluetooth access permission, it may prompt you to grant it. Follow the on-screen guide to allow access:
The UI
Following is the UI of the Web App, it’s pretty straightforward. Some advance actions hidden by default. You can show them by check the “Expert Mode” menu in the three dots menu:

Link Power Pack Quick Start

Pair with Link Power Pack

Some actions are marked with the often advanced or sensitive actions.

icon because they require authentication. These are

When you perform one of these actions, your operating system (OS) will prompt you to enter a PIN to pair with theLink Power Pack device. You’ll only need to do this once, unless you delete the Link Power Pack bond from your OS settings.

NOTE: The default PIN is “020555”.

Troubleshooting
According to Mozilla’s Web Bluetooth documentation (https://developer.mozilla.org/en-US/docs/Web/API/Web_Bluetooth_API#browser_compati bility) , Web Bluetooth is supported on:
Windows/macOS: Chrome, Edge, Opera Android: Chrome, Edge, Opera, Samsung Internet iOS: Bluefy (not on the list, but has been confirmed on iOS 18.5)
1. Activate Link Power Pack, and make sure Bluetooth is turned on: the Bluetooth icon should be highlighted white (not green or dim grey) on top of the screen.
2. Make sure your system has Bluetooth hardware and it is turned on: For Windows Go to `Settings` `Bluetooth & devices`. Make sure Bluetooth is turned on In `Bluetooth & devices`, click `Add device` Choose `Bluetooth` Wait for Windows to discover your BLE device, you should see the device named `Link Power Pack` in the list For Android Make sure Bluetooth is turned on

Link Power Pack Quick Start
you should see the device named `Link Power Pack` in the `Available devices` list
3. Install and launch a supported browser

Specifications
Name
Model
DC port XT60 port Work unit Dimensions
Weight

Link Power Pack BP4SL3-D4 (DeWALT® Interface) BP4SL3-M4 (Makita® Interface)
15V~21V (50W Max) 15V~21V(65W Max)
1~4 Battery 153mm x 70mm x 130 mm
~370g

Documents / Resources

PeakDo Link Power Power Bank for Star Link Mini [pdf] User Guide Quick Start V 1.1, Link Power Power Bank for Star Link Mini, Power Bank for Star Link Mini, for Star Link Mini, Star Link Mini, Link Mini

References

• User Manual